Telnet Page 3 WarpOne Format

Page 3 contains information defining the statistics for each interface in the Router (model specific) and is updated every 1 second. Layout of Page 3 diagnostics is defined in the following diagram (see each section for details of the information captured and definition).

Example of a WarpOne Page 3 layout

        ZyTrax Status page 3 (5670101202)

 Router Interface stats
1       7250      SCC1      SCC2      SCC3       PC1       PC2       PC3
2       8823    141020         0     21030   1679673         0         0
3       1211      2818         0       394     17494         0         0
4          0         0         0         0         0         0         0
5          0     22402         0      2463         0         0         0
6       7353    457431         0    110244   9075221         0         0
7       1259      2648         0       384     16167         0         0
8          0         0         0         0         0         0         0
9          0         0         0         0         0         0         0
10      3620     27851         0      3239     33453         0         0
11         0         0         0         0         0         0         0
12         0         0         0         0         1         0         0
13         0         0         0         0         0         0         0
14         7         0         0         0         0         0         0
15         0         0         0         0         0         0         0
16                   0         0         0
17                1736         0       182
18               19705         0      2174
19                 961         0       107
20                   0         0         0
21               21441         0      2356
Flash: write=39080 erase=5 susp=10 res=10 err=0

Key by line number:

Note: D Chan = 7250 in documentation below

Line	Name	Meaning
1	ifDescr	Standard entry (ZyTrax standard where 7250 is the D channel device number (this column shows all D channel traffic) SCCn Serial Communications Controller (n may be 1 to 3) handles B channel and serial (DB9 or DB25 connectors) PCn PCMCIA interface (n may be 1 to 3)
2	ifInOctets	Number of incoming bytes transferred via this interface since the applicaion was loaded.
3	ifInUcastPkts	The number of packets received by this interace since the application was loaded.
4	ifInDiscards	The number of packets discarded by this interface (excludes error packets).
5	ifInErrors	The number of incoming packets received with errors (typically discaded).
6	ifOutOctets	Number of outgoing bytes transferred via this interface since the applicaion was loaded.
7	ifOutUcastPkts	The number of packets received by this interace since the application was loaded
8	ifOutDiscards	The number of outgoing packets discarded by this interface (excludes error packets).
9	ifOutErrors	The number of outgoing packets with errors (typically discaded)
10		ZyTrax entry The number of interrupts (may be incoming and outgoing).
11		ZyTrax entry. The number of memory allocation errors (if error results in discading the block the ifOutDiscards will also be incremented).
12		ZyTrax entry. PCMCIA - The number of times the PCMCIA card has been reset by software due error detection. Only used by the PCMCIA interface. SCC - The number of times the SCC was reset following a timeout or if ready bit on after a termination interrupt. 7250 – the number of times the T7250 interface was reset.
13		ZyTrax entry PCMCIA – the number of overflow conditions on input. SCC – number of unprocessed interrupts (type of int not handled). 7250 – number of unprocessed interrupts (type of int not handled)
14		ZyTrax Entry 7250 – the state of the U interface (7 = operational) PCMCIA – overwite incoming buffer warning conditions (LAN) SCC – number of times we retried to send our SPID.
15		ZyTrax Entry (ifIntOverruns) Unexpected Interrupt.
16		ZyTrax Entry (ifLenError) 7250 – NA PCMCIA - NA SCC – Length error reported on SCC termination.
17		ZyTrax Entry (ifNonAligned) 7250 – NA PCMCIA - NA SCC – Non aligned error reported on SCC termination.
18		ZyTrax Entry (ifAbort) 7250 – NA PCMCIA - NA SCC – Abort error reported on SCC termination.
19		ZyTrax Entry (ifCRCErr) 7250 – NA PCMCIA - NA SCC – CRC error reported on SCC termination.
20		ZyTrax Entry (ifOverrun) 7250 – NA PCMCIA - NA SCC – Overrun error reported on SCC termination.
21		ZyTrax Entry (ifCDLost) 7250 – NA PCMCIA - NA SCC – CD (Carier Detect) lost error reported on SCC termination.

Notes:

The ‘Name’ column above where present indicates the standard SNMP MIB names used for Interface statistics.

Telnet Page 3 WarpOne Format

Example of a WarpOne Page 3 layout

Key by line number:

Notes:

Contents