WarpTwo - The 'Single Box' Multicast Router range
Known Problems
...these pages contain information about known problems, clearance and any applicable work-around.
The following problems were
identified in WarpTwo applications software. ZyTrax is working on a solution.
| ID |
Problem description |
Workaround |
Cleared |
| B00-23 |
If the Router application
is running from High FLASH and an application load is performed when the Router is busy
(> 4K bytes per second) the router may fail and reset during the load. This problem
does not occur if the application is running from Low FLASH.
|
During application load
operations minimise the traffic running through the router.
|
|
| B00-29 |
If a non-Microsoft Telnet is used the
router will fail to allow the Login sequence. This is due to the way
Telnet handles the echo character.
|
Use the standard Microsoft issued Telnet
application for all router diagnostics.
|
|
Problems, comments, suggestions, corrections (including broken links) or something to add? Please take the time from a busy life to 'mail us' (at top of screen), the webmaster (below) or info-support at zytrax. You will have a warm inner glow for the rest of the day.
